This Week in Brew Disasters: Big Irish American Red Ale…the bottling

It’s been nearly a month since we at Flog This Dead Brewing avoided injuring even though we boiled 10 gallons of wort for over 3 hours inside a drafty hall filled with randomly running children and tipsy people. We were able to move the wort into fermenting carboys and added yeast at which point the wort changed (legally at least) into beer. A week later we took a sample (using a wine thief, essentially a long plastic pipette)  and its specific gravity measured 1.023.  Though there were some “dish soap” tastes–probably phenols produced by the yeast.

Hydrometer shows the finishing specific gravity of 1.014

After one month in the primary and secondary combined, and two weeks after dry-hopping with an ounce of cascade hops, the specific gravity has reached its final gravity of 1.014.

So today, the beer will be bottled and set aside for bottle conditioning. Bottle conditioning is the process of adding sugars to the beer to awaken the yeast and get them working again. Their burping of carbon dioxide inside the bottle will carbonate the beer.

But, first we will taste the month-old beer to see how it’s doing so far. The beer has a deep red color with a floral nose and taste (reminiscent of rose petals). The soapiness is gone and hoppiness jumps out at you but it is still slightly sweet. In future batches, I think the malt might use a little more presence. Since this was an extract brew there was not much we could do about that. The yeast ate the extract and left the beer a little drier. In an all-grain batch I might try mashing in the 155F (68C) range which will leave some more unfermentable sugars that the yeast can’t digest.

I’ve decided to experiment  with the flavor profile by bottle conditioning half of the batch with corn sugar (0.46  oz/gal) and half with honey (0.56 oz/gal). I’m interested to see how the honey will play with the already great flavors. It may be too much of a good thing. We will know in a few more weeks which method was the right choice.

Carbonation calculation for a brown ale.

Here’s the recipe for the Big Irish American Red beer:

17.00 lb Pale Liquid Extract (4.0 SRM)
0.75 lb Caramel/Crystal Malt – 40L (40.0 SRM)
0.75 lb Caramel/Crystal Malt -120L (120.0 SRM)
0.75 lb Roasted Barley (300.0 SRM)
2 oz Columbus hops (added at 20 minutes before flame off)
2 oz Centennial hops (added at 10 minutes before flame off)
2 oz Citra hops (added at 1 minute before flame off)
2 oz Amarillo Gold hops (added at 1 minute before flame off)
California Ale Yeast (White Labs #WLP001)

After the yeast has been added and two weeks of fermentation here is the expected beer profile:
Est Original Gravity: 1.062 SG
Est Final Gravity: 1.014 SG
Estimated Alcohol by Vol: 6.3 %
Actual Alcohol by Vol: 6.3 %
Bitterness: 44.5 IBU
Calories: 278 cal/pint
Est Color: 19.2 SRM

Cervesariis Feliciter.” (“Long live the Brewsters”) — Ancient Roman Blessing

This Week in Brew Disasters: Big Irish American Red Ale follow-up/Taste and Specific Gravity

Here's Big Red at 1 week old

Last week in brew disasters at the Rhythm and Brews festival in Lakeport, CA on Saturday, Saint Patrick’s Day, March 17, 2012, Paul and Norm avoided scalding anyone while producing 10 gallons of Big Irish American Red beer wort in 30 minutes 3 hours inside a drafty hall filled with randomly running children people unaware that we were boiling liquid.

Today, I took my first sample of the wort beer (That’s it on the right ==>). The specific gravity measured at 1.023. That’s after one week in the fermenter at 64F. I tasted it too. It’s okay. Though there are some “dish soap” tastes–probably phenols produced by the yeast. I’m hoping that a week or two longer in the carboy helps. Unless, it really is dish soap then there’s no hope for it.

Should I add more yeast to try to get the specific gravity down to 1.015 and clean up some of those phenol tastes?

Ingredients:

17.00 lb Pale Liquid Extract (4.0 SRM)
0.75 lb Caramel/Crystal Malt – 40L (40.0 SRM)
0.75 lb Caramel/Crystal Malt -120L (120.0 SRM)
0.75 lb Roasted Barley (300.0 SRM)
2 oz Columbus hops (added at 20 minutes before flame off)
2 oz Centennial hops (added at 10 minutes before flame off)
2 oz Citra hops (added at 1 minute before flame off)
2 oz Amarillo Gold hops (added at 1 minute before flame off)
California Ale Yeast (White Labs #WLP001)

After the yeast has been added and two weeks of fermentation here is the expected beer profile:
Est Original Gravity: 1.062 SG
Est Final Gravity: 1.014 SG
Estimated Alcohol by Vol: 6.3 %
Actual Alcohol by Vol: 6.3 %
Bitterness: 44.5 IBU
Calories: 278 cal/pint
Est Color: 19.2 SRM

Cervesariis Feliciter.” (“Long live the Brewsters”) — Ancient Roman Blessing

This Week in Brew Disasters: Big Irish American Red Ale (after the Rhythm & Brews event)

In this photograph, emergency medical technici...

Fortunately these guys weren't needed. No one got hurt too badly. (Photo credit: Wikipedia)

This week in brew disasters:Paul and Norm were up to the challenge of producing 10 gallons of beer wort in 30 minutes 3 hours inside a drafty hall filled with randomly running children and less than sober people who have no idea that we were boiling liquid at the Rhythm and Brews festival in Lakeport, CA on Saturday, Saint Patrick’s Day, March 17, 2012.

Speaking of no ideas. I have no idea of how many health and safety codes we might have violated. I love brewing. Brew days just stoke me with excitement. But, if we were to do this again, I would like to see: signs to caution people to the dangers of boiling liquids, first aid supplies for burns and emergency medical technicians close by, cordons around the boil kettles, in other words a decent incident action plan (IAP).

Thankfully, no one was injured.

The yeast joined the wort at 6:45pm on Saturday and by 6am on Sunday the beer showed active fermentation.

Ingredients for Big Irish American Ale:

17.00 lb Pale Liquid Extract (4.0 SRM)
0.75 lb Caramel/Crystal Malt – 40L (40.0 SRM)
0.75 lb Caramel/Crystal Malt -120L (120.0 SRM)
0.75 lb Roasted Barley (300.0 SRM)
2 oz Columbus hops (added at 20 minutes before flame off)
2 oz Centennial hops (added at 10 minutes before flame off)
2 oz Citra hops (added at 1 minute before flame off)
2 oz Amarillo Gold hops (added at 1 minute before flame off)
California Ale Yeast (White Labs #WLP001)

After the yeast has been added and two weeks of fermentation here is the expected beer profile:
Est Original Gravity: 1.062 SG (Measured 1.060)
Est Final Gravity: 1.014 SG
Estimated Alcohol by Vol: 6.3 %
Actual Alcohol by Vol: 6.3 %
Bitterness: 44.5 IBU
Calories: 278 cal/pint
Est Color: 19.2 SRM

This Week in Brew Disasters: Big Irish American Red Ale

Hop cone in the Hallertau, Germany, hop yard

Hang out with me at Rhythm & Brews. (Image via Wikipedia)

This week in brew disasters: will Paul and Norm be up to the challenge of producing a beer in 30 minutes inside a drafty hall filled with people who have no idea what the boiling liquid is for and why hops smell like pot?

Maybe not.

But, you can find out how easy brewing beer really is. Come join me and others from the Lake County Homebrewers group at the Rhythm and Brews festival in Lakeport, CA on Saturday, Saint Patrick’s Day, March 17, 2012.

“Cervesariis Feliciter.” (“Long live the Brewsters”) — Ancient Roman Blessing

At 1:30 pm, we will boiling 12 1/2 gallons of wort (the raw beer before yeast is added) for 10 1/2 gallons of what we are calling a Big Irish American Red Ale. We only have 30 minutes on the schedule so we’ll be using liquid malt extract instead of soaking (mashing)  two-row malted barley in hot water to extract the starches and sugars. We will be steeping some specialty grains to add color (Lovibond–L–denotes darkness) and flavor. The specialty grains are: 40 L crystal malt, 120 L crystal malt, 300 L roasted barley. [Update: boiling liquids and drunk people dancing…should be fun!]

Ingredients:

17.00 lb Pale Liquid Extract (4.0 SRM)
0.75 lb Caramel/Crystal Malt – 40L (40.0 SRM)
0.75 lb Caramel/Crystal Malt -120L (120.0 SRM)
0.75 lb Roasted Barley (300.0 SRM)
2 oz Columbus hops (added at 20 minutes before flame off)
2 oz Centennial hops (added at 10 minutes before flame off)
2 oz Citra hops (added at 1 minute before flame off)
2 oz Amarillo Gold hops (added at 1 minute before flame off)
California Ale Yeast (White Labs #WLP001)

After the yeast has been added and two weeks of fermentation here is the expected beer profile:
Est Original Gravity: 1.062 SG
Est Final Gravity: 1.014 SG
Estimated Alcohol by Vol: 6.3 %
Actual Alcohol by Vol: 6.3 %
Bitterness: 44.5 IBU
Calories: 278 cal/pint
Est Color: 19.2 SRM

Update [2/15/2012]: I’m working on a starter yeast for this beer using John Palmer’s How to Brew.